After clamping the mold closed position zero how to set
6 November, 2014 at 2:07 am in Buy & Sell
Location : After clamping the mold closed position zero how to setSend Inquiry
After clamping the mold closed position zero how to set? Mold processing product size, shape, thickness are different, and therefore the speed mold opening and clamping also block or slow. After the mold closed, you need to set the zero point clamping position. Anhui press brake tooling Represents, in many cases, is not necessarily set to the zero position at the zero position, which has a better state will improve the machining quality. If mold using an electronic scale, then zero position is not necessarily the best state, because this state electronic foot rod to the limit position, vulnerable to damage. Clamping position of zero, zero is the moving platen, after changing the mold, the mold thickness changes, such as thicker than the original, we should co-type cylinder seat back adjustment, linked together by a toggle-type cylinder block and dynamic template, and straight after the toggle fixed length, so moving the template zero position, it can be seen as a zero position Closing Cylinder Block. The relative zero point of the mold in terms of different thickness, and of course, a pair of molds in a zero position. This is called transfer mode, are empirically thing, not so dry precision, operatives of the Closing Cylinder Block after tune, then mold, mold Bulong found two pieces, put together type cylinder block and then forward tone, tone more, find outriggers stretched straight on and then further tune, you can generally make crank straight.