bending machine machine When installing bending machine dies
28 November, 2014 at 2:07 am in Business
Location : bending machine machine When installing bending machine diesSend Inquiry
Adjust the bending machine tooling, including what aspects Adjust the law in order to better meet the work operation, press brake tooling Of course, it is not an exception, adjust some bending machine tooling mainly includes three aspects, namely the machine to adjust the bending machine, bending machine slide stroke adjustment, bending machine stroke adjustment module, the following were made to this detailed explanation. Adjustment (a) bending machine machine When installing bending machine dies, we must first understand the next machine performance, open bending machine, patience adjustments and checks to see if the machine may have been used before in the dust, as well as iron and other debris. Prevent unnecessary trouble later use. (2) bending machine slide stroke adjustment First check the bending machine mold thickness ratio of the upper and lower module is normal, ordinary slider switch point on the need to control the line of travel, this is must be noted, otherwise it will lead to mold is not working, but some people are still often guilty such errors. (3) bending machine stroke adjustment module After adjusting the standard slide stroke after the next is the upper limit point adjustment module, the general situation for the module to the highest point, is to set up the module and switch. This can be the location to stay out of the module, in this process, it is also necessary to slow down the processing module. It should be noted that the various adjustment bending machine tooling is important, but it must be in ensuring the absolute safety of personal conduct, otherwise this will cause some damage themselves more harm than good.