Change the Traditional Crushing Mode of Jaw Crusher
15 June, 2013 at 8:17 am in Education
Supervisory control software was compiled with vc, thus realize the remote monitoring of the machine. With the system real-time pressure value collected by a pressure sensor, this system collects signals to supervisory control computer, in which the pressure is described with dynamic curves and the real-time information of pressure is stored into access database. The ultra-high pressure crusher with PLC and supervisory controlling is able to work stable under the working pressure as high as 200MPa.
The main structure of the Jaw Crusher are composed of stander, eccentric shaft, belt pulley, flywheel, movable jaw plate, wrist plate ,adjustable gap screw, offsetting spring, fixed jaw plate. The wrist plate also has the effect of guarding. Jaw crusher uses motor as its power. The motor drives the belt and belt pulley to make the moveable jaw move through the eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room.
Rock crusher is used to crush jaw crusher stones and rocks, and the size of the stones and rocks those can be crushed by the rock crushers are more than 3mm. The rock crushers can be divided into 3 types by the sizes of feeding opener and output: primary rock crusher, secondary rock crusher (medium crusher) and fine rock crusher. Rock crusher consists of cone crusher, mobile crusher, jaw crusher and impact crusher . If you want to know more information about rock crusher, read the article belows. Rock crusher plays an important role in mining and construction industry, metallurgy industry, building material, highway, railway, water conservancy, chemical materials and many other departments. The rock crusher costs little while it operates with large crushing rate and high yield. The structure of the machine is simple and the maintenance is easy.