Common Faults and Solutions of the Mine Dryer
18 October, 2012 at 5:27 am in Business
The drying machine used in the mine is a kind of large scale mining machinery equipment. The breakdown of dryer will not only affect the working efficiency, but also is more difficult to maintain it. Now Hongxing experts will tell you the common breakdowns and their solutions of dryer for you.
1. The mine dryer appears the explosive.
There are two main reasons for this problem. One is the material in the dryer clogging the machine, the other is the temperature of the dryer is too high, causing the internal fire of the machine. If it is the material clogging the machine, it is necessary to stop the dryer and clean it up. And it is better to do the routine maintenance of the dryer to prevent such situations occur. If it is the dryer temperature too high, it is better to reduce the fuel supply, thereby reduce the temperature of the device, meeting the production requirement.
2. The final products can not be discharged normally.
This phenomenon is mainly caused by the nonstandard installation of the dryer gas leakage causing the low air pressure. This problem can be said as the easiest and the most difficult problem. It is the easiest problem because this problem can be solved easily through checking the drawings and identifying the problem; it is the most difficult problem because to solve such a problem often causing the reinstall of the dryer, wasting time and human resources.
3. The wet and dry extent of the final products is not evenly. This phenomenon happens mainly because the drying material is solidified into a group. It is better to spread out the materials before drying. At the same time, it is better to pay attention to the correct use of the dryer.
If you want to get more information, please contact Hongxing Company or visit Hongxing Company directly.
Feeder Machine : http://www.crusher-export.com/feeder.html
Wet type Rod Mill : http://www.crusher-export.com/wet-rod-mill.html