Compound Crusher Has Achieved Certain Mining Achievements
12 November, 2012 at 8:20 am in Business
As a famous crushing and screening manufacturer in the industry, Henan Hongxing Mining Machinery has improved the hydraulic gyratory crusher and spring cone crusher according to the shortcomings. The crushing efficiency has been improved so that the operating rate of the crusher can be guaranteed more than 80% and the effect is very obvious.
First, Hongxing improve the crushing equipment from the aspect of base material.
The cement mortar watering is generally used in the base of the cone crusher. Due to the strong impact loads, the base seriously sinks, which cause the reduction of the production of the crusher. If we still use the cement mortar watering, it will affect the production of the processing workshop. Therefore, we can use new materials such as epoxy resin as the base of watering material of cone crusher. The production practice shows its strength, stiffness, and other indicators can meet the requirement to obtain the desired effect.
The epoxy resin with the linear structure can give the polymerization reaction with the curing agent to form high-strength polymer with the network structure. The compressive strength is 3 times of the concrete.
After the demolition of the over machine, the overall base remains intact. At the contacting parts between the active base and the cement base, you can use the air pick to chisel average about 30 ~ 40mm high. Install the active base to the required height for horizontal alignment. In addition, you should fasten the screws of the active base. Use the oxygen and acetylene flame to dry the chiseled parts of the base.The irrigation materials include epoxy resins, ethylenediamine, and dibutyl phthalate wollastonite. When the curing time reaches 12 hours, the equipment installation can be completed. After the 48 hours’ curing time, re-fasten the screws. As the professional manufacturer of complete sets of mining machinery, such as sand washing plant, HXJQ is always doing the best in products and service.
Second, we will explore the improvement of the spring system. The spring system of the cone crusher can ensure the crushing force in normal working of the crusher and it is also the safety device. In terms of the problem of the insufficient pressure of the spring, we can re-adjust the spring pressure and increase the thickness of the nut.
Third, we should improve the filler material. We can use the cement mortar to replace the zinc alloy. The cement mortar can save time and effort, and the cost is very low. In the above ways, the improvements of the cone crusher will greatly improve the starting rate of the machine.
rotary drying machine: http://www.jaw-breakers.com/T71.html
cement kiln: http://www.jaw-breakers.com/T75.html