Considerations on Adjusting Vibrating Screen
22 November, 2012 at 8:34 am in Business
When installed circular vibrating screen, it should be fixed in prepunched foundation, if you do not punch special foundation for circular vibrating screen, you need embed anti-vibration rubber sheet between equipment base and workbench. Before using circular vibrating screen, you must remove the support that is convenient to transport, but also connecting safe and reliable protective earth wire to the vibrating screen. In order to ensure the balance of the sieve, so that the spring is fully vertically placed in the sieve and stand on the upper and lower spring seat, on the other hand, the vibration part of sieve body does not have a hard contact with the hard part outside the sieve machine.
When start circular vibrating screen, you should appropriately switch power, and check if the rotation direction of the motor is synchronous running with opposite directions. At run time, if abnormal voice happens, immediately shut down and check it; after normal operation, first you should put a little material into the mouth, and watch if the material run to the direction normal to run, after the normal operation, items can be added to the demanded amount of discharge mouth. In order to extend the life of screen material, materials through feeding mouth do not have much impact on the screen. If the item has big difference between specific gravity and intensity, you can add a sieve to alleviate the impact. Vibrating screen can achieve the best sieving results by adjusting the angle at both ends of the eccentric vibration motors, which can increase or decrease the excitation force.
Before stopping Vibrating screen, it should remain no materials on the screen; when stop equipment, noise and amplitude are larger. It is normal.
impact crusher : http://www.ore-mills.com/impact-crusher.html
Vibrating screen : http://www.hxjqcrusher.com/Circular-vibrating-Screen.html