Ensure The Good Working Condition of Lime Rotary Kiln
26 November, 2014 at 7:28 am in Buy & Sell
Ceramsite sand rotary kiln to create the outstanding result in the multiple conditions to be met, among them the importance of the quality we all know, also don't do too much analysis here. If you have successfully to buy high-quality ceramsite sand rotary kiln, the next task is to ensure that the equipment has a good working condition.When installing lime rotary kiln, the installer needed operation process analysis.
Must be strictly enforced rotary foundation pier arrangement, cooling kiln is also another determination of the gear for kiln installation, due to the various parts of the rotary kiln burner associated branch expansion caused by high temperature, this will cause a certain change of the rotary kiln parts size range, so in the production process of rotary kiln, foundation pier horizontal distance to determine after the need according to the thermal expansion coefficient.
Cylinder section longitudinal seam of the counterpart misalignment amount can only be less than 1.5 mm, and circumferential weld fault range can only less than 2 mm.Different thickness of plate steel during stitching, if two pieces of steel plate thickness difference is larger than the 30% of the thickness of the sheet, the outer wall in splicing need to do the corresponding processing according to the length of 5 or more standard thickness, to be processed into excessive cone surface, at the same time, this section steel plate surface roughness must be below 12.5 micrometers.When we installation of lime rotary kiln there's a lot we need to pay attention to.
In addition to their own body of cement rotary kiln for installation and other related arrangement must also be to achieve perfect match of the system, it will be more conducive to normal efficient metallurgical rotary kiln production.
cement plant: http://www.china-ftm.com/pros/cement_mill.html