Hammer Crushers Adopt New Technology
17 June, 2013 at 2:59 am in Business
Currently, large hydropower projects have been built in China is Three Gorges Project, and the large-scale projects hydropower station in the construction are Xiluodu Hydropower, etc., which will provide support to China”s economic implementation as well as play a major role to the protection of droughts and floods in China.The spiral chute separator is composed by ore divider, feed chute, spiral groove, interception slot, ore bucket and slot bracket six parts. Taking Hongxing machine spiral chute separator as an example, the helical groove which is composed by the helical segments is the main member. The helical segments is made of the FRPs (glass fiber reinforced plastic), and coupled together by the bolt. Glass fiber reinforced spiral slice is lightweight and sturdy. There is a wear-resistant layer in the grading side, which makes it durable.
The first end of the slot is equipped with the multi-tube leveling splitter with even grading and simple control. The pulp is evenly and slowly fed to spiral groove surface. The end of the spiral groove is equipped with a valve block type products interception slot, which divides the ore current into several products according to grade. It changes the interception width of each product by adjusting the position of the valve block. Then ore bucket is a concentric annular cylinder, separately collecting and driving intercepted stranded ore flow.
The cross section of the spiral groove is a cubic parabola. The change in the slope of the curve is especially suitable for fine particulate material sorting.The stone production line is a kind of mining equipment and is widely used, so it is inevitable to encounter a variety of equipment problems, if the equipment meets the condition of the overheating during its work, you can deal with it in accordance with the following methods.The possible reason: due to the excessive wear of drive bearing made the gears meshed incompletely or badly damaged, and the foot link bolts loosen, all resulting in the production process.
Solution: adjust the gear gap, timely replace the worn parts, and re-tighten the bolts, so as to ensure the stability of the equipment during the work. The cylinder and the top junction of the sand maker occurs pulp leakage. The reason for that is caused by the bolts loose between equipment, the too long pin and badly worn equipment gasket.In order to reduce the occurrence of droughts and floods, the China government issued a series of policies and measures to strengthen the protection of the environment in the whole China; meanwhile, make the construction of water conservancy and hydropower engineering according to the specific circumstances to provide not only water, electric energy to the economic construction in the region, but also play a certain part role in local droughts and floods.