Many Parts of Sawdust Dryer Need to Add Lubrication Oil
4 December, 2014 at 6:43 am in Business
For the mining equipments, they are manufactured of iron and steel basically. So for these mechanical devices, the first job is to prevent the rust and we should re-paint the surface as soon as possible.It is necessary to add lubrication oil on metal blade, cutting disc, and other parts to ensure quality.we should check and clean the mechanical equipment before storing.Let go the cooling water of engine and replace the engine oil. And the equipment with fuel tank should be filled with fuel to prevent rust.If the sawdust dryer separator chimney discharging or down opening vapor, it have two reasons.
First, because the separator is too small, so we should Change or transform the separator.Second, if the wood chip dryer separator has design flaw or the wind net and wind pressure are miscalculated, we should compromise settlement with the rotary dryer manufacturer.If some parts could not get improper lubrication oil, it would produce friction during the operation.
It is proved that the heat generated from friction in a short time could melt the metal, resulting in mechanical damage and even death to some parts.If the sawdust dryer for sale installs incorrectly, or leak air, we should to compare to the installation drawing and check whether the installation is correct, and the pipeline seam is air leakage.
For the drying machine, many parts need to be added lubrication oil, because lubrication could ensure the normal production and of dryer. 2. If we give enough lubrication oil to the friction parts. It would adhere to the surface and form the film after the oil flowed to the friction parts. It would reduce the friction between mechanical parts. And the strength and toughness of film could play the key role during lubrication work.
silica sand dryer: http://www.ftmsino.com/products/sand-dryer.html