Methods That Used to Increase Vibrating Feeder Efficiency
5 October, 2012 at 8:26 am in Business
The rotary kiln produced by Henan Hongxing Mining Machinery is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. Rotating kiln can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used. To service-oriented brand integrity, as the professional manufacturer of complete sets of mining machinery, like classifiers, Henan Hongxing is a jaw crusher supplier which always does the best in products and service.. The rotary kiln produced by Henan Hongxing Mining Machinery is designed with the best working conditions, which enables it to save 10-15% of energy and increase 10-15% of productivity compared with common kilns.
The vibration of this machine is manly resulted from the big vibration of the horizontal and vertical direction, but small vibration of the axial direction, which will change the position of the riding wheel of the rotary kiln, and the centre line of the rotary kiln deviates, so this machine will vibrate.
According to the measurement results of the centre line of this equipment and its operation situation, Hongxing Machinery gives relevant solution.
1. Adjustment the riding wheel guided by the measurement result.
2. Since the adjustment is the correction of the barrel of the kiln, and the stress condition of the back riding wheel and the tyre after the adjustment will change, the adjusting principle of 'fine turning many times and observing the stress condition while fine turning' should be followed. When the first adjustment is finished, the nest adjustment should be fulfilled after observing the machine for one day or so. To a service-oriented brand integrity,As the professional manufacturer of complete sets of mining machinery, like ore beneficiation, Henan Hongxing is always doing the best in products and service.
3. In the adjustment process, the workers should take record the temperature of the kiln barrel and the bearing bush and the riding wheel, the speed of the kiln, the amount of the materials that are fed into the kiln and the stress on the hydraulic blocking wheel, and observe the formation condition of the oil slick on the bearing bush and the vibration condition of the kiln and compare the changes before and after the adjustment.
Adjust the machine for one week; the vibration condition of the rotary kiln will be ameliorated significantly.
The characteristics of the high temperature chlorination volatile roasting process are the followings. The recovery rate of the tin and lead is very high. In addition, the high temperature chlorination volatile can be used to comprehensively recycle various associated metals. However, the drawback of this kind of process is that it is very complex. The rotary kiln belongs to the furnace which can be rotated, which was firstly used for burning cement clinker.
Now it is also used in refractory and metallurgical industry. There is a certain angle between the body and the level of the rotary kiln body which is rotated by the large gear by the reducer through the motor. The fuel and the primary combustion-supporting air are sent to the kiln. The secondary combustion-supporting air enters the kiln from the cooling cylinder after preheating. The combustion products are sent to the chimney and discharge to the atmosphere by the fume extractor after flowing through the kiln and dirt catcher. The raw materials enter the kiln through the feeding tube and uses the rotation of the tilt kiln to put the materials forward.
cement making machine:http://www.jaw-breakers.com/T73.html
impact crusher for sale:http://www.jaw-breakers.com/T41.html