Obeying These Rules can Prolong Use Life of Sand Maker
26 October, 2012 at 9:13 am in Computer
Sand making is to use the mechanical methods to overcome the internal cohesion of the solid materials and split the materials. The mechanical force is used to crush the bulk materials into small pieces of materials. When we choose the sand making method, the physical and mechanical properties of the materials have decisive role. There is great difference of the crushing hardness between the silty grain and the crystalline grains. Therefore, there is great difference for sand making process. For the particularly tough materials, the impact and compression method are very effective. For the materials with toughness, you had better use milling ways. For the brittle materials, splitting is appropriate.
1.There should be some person responsible for the machine. Operator should be trained. Understand technical performance of the equipment, familiar with the rules.
2. To keep machine smooth running, draw out regulations of machine maintenance and safe operation. Meantime prepare necessary maintenance tools, lubrication material and other related equipments.
3. Check firmware every shift, fasten immediately if any flexible.
4. Stop the machine, open the checking door and check inside wear condition. Replace and remove immediately if any wear, wearable block should be changed whole set if any wear to keep impeller balance in running. Replace or repair immediately if any wear on impeller.
5. To check impeller firmware every 7 days, wearable parts should be replaced and repaired if any wear. To a service-oriented brand integrity, as the professional manufacturer of complete sets of mining machinery, like jaw crusher, Henan Hongxing is always doing the best in products and service.marble grinding mill?http://www.crusher-machine.com/n222.html
6. Check firmware and wearable parts in whirlpool chamber every half a month, if any abnormal condition, take immediate means to remove.
7. Thin oil station use 35# bearing oil, oil amount is 150-190L. Change oil in 200hours first time, then change oil every 1000. When change oil, open the oil pipe, clean and dry it, change damaged seal mat.
8. Driving V belt tensioning is moderate, make sure v belt strain evenly, motors in two sides are imbalanced, and the electricity current is not more than 15A.
9. Check hydraulic system frequently, maintain immediately if any abnormal phenomenon.
10. Open the bearing tube and clean in 1000 hour's normal running first time.
China has been included in the Sand largest producer of the ranks of the next few years, China’s sand system equipment will enter the international market. This requires that our sand making machine manufacturer continuous R & D, production, following the development of science and technology, making Sand constantly upgrading to keep up with the rapid development of sand and gravel industry. Red Star machine the most mine sand making equipment manufacturer is also in constant development, allow enough qualified building sand for the construction industry. Not only promote the production and application of artificial sand, but also make a favorable move for the country’s long-term sustainable development.