Pay Attention to Safety Operation of Sand Maker
24 October, 2012 at 3:34 am in Business
The sand maker is the most important sand making equipment. In the using process, safety should be first. The following is the safety issues and day-to-day maintenance of the sand maker for your reference.
1. Stop and check the sand maker periodically. It is better to open the observation door to observe the inside wear situation of crusher, including the center of the feeding tube, cone hat, the runnier plate of the impeller, circular plate, wear plate, and so on. If there is any, replace or repair the wear part timely. In order to avoid having danger, pay attention to that it is strict prohibited opening the observation door to observe the inner workings situation in the working process of the crusher. If there is abrasion on the impeller, it is better to find the manufacturers to replace or repair it timely. Special attention, without the consent of the manufacturer, it is prohibited for the homemade impeller. Otherwise, the consequence is proud.
2. The sand maker adopts the special lubricating grease. It is better to add the appropriate amount of grease per 400 hours. Usually, when the sand maker works about 2,000 hours, it is necessary to open the base bearing to clean it, and about 7200 hours, the bearing should be replaced.
Notes: The upper end of the base bearing is the swimming end, and the lower end is the fixed end. After the assembly, it is necessary to pull the pulley by hand until getting flexible rotation.
3. The tensioning force of the transmission triangle belt should be adjusted appropriately, ensuring the uniform stress of the triangular belt.
4 In the operating process of sand maker, because the device is a high-speed device, so the safety in production should get more attention. The operator should keep away from the device. The maintenance of the sand maker should be carried out after the shutdown.
Chute Feeder : http://www.crusher-export.com/feeder.html
bucket hoist conveyor : http://www.ore-mills.com/bucket-hoist-conveyor.html