web analytics

Welcome, Guest. Login / register for a free account  

Remove quarry crusher machine spindle step

27 February, 2015 at 6:47 am in Business

No Image Available

Contact Details


Location : SHANGHAI

Website : http://www.quarrycrushert.com/

Send Inquiry

Remove the broken quarry crusher comprises the following steps:

1 remove the adjusting sleeve.

2 the main spindle screw ring is screwed to the upper end of the main axle.

3 with a crane or lifting device field, will be carefully broken quarry crusher machine crane from the crusher. The wire rope should be biased towards the eccentric sleeve webbing and form an included angle with the vertical direction under the condition of lifting. In this figure, the circle marked with the contact part of spindle and spindle bush and wire rope tension direction by crushing. quarry crusher Conus pull or oblique, slightly eccentric sleeve webbing, in order to make the body of the sealing ring and the bowl type bearing frame between have enough clearance. This way can avoid the damage of HPC Cone Crusherlifting, body and bowl type bearing frame sealing device. When removing the adjusting sleeve before, as long as the attention to the position row ore the mouth of the determination of eccentric sleeve edge or the thick heavy position. The body of the low side position of eccentric sleeve edge or thick edge position.

In the demolition process, do not pay attention to the bowl type bearing frame sealing ring and sealing ring. The spindle body touching the demolition, to ensure that the sealing ring can be re properly placed in the bowl type bearing frame.

4 The part hanging out of crushing quarry crusher, all polished surfaces to check body and a main shaft, repair all scratch or nicks and rust and pitting.

5 in order to an appropriate height of broken wall demolition operation, suggested that a sufficient depth and the size of the hole in the floor or ground to place the crushing cone department. The hole should be the appropriate drainage measures to avoid accumulation of water. The crushing cone part is arranged in the hole of the body support skirt on the floor or on the ground.

Tags : quarry crusher,spindle step Email This Post Print This Post

About Us

Global Freead is the no.1 advertising portal available online to easily reach worldwide customers. It is a free classified website with a wide range of visitors in internet. A Site To Post Free Buy Sell Global Classified Ads Online. Search Classified Ads For Jobs, Find Real Estate Properties On Sale and much more.