The Density of Coal Briquette Machine Is Economic
12 November, 2014 at 1:15 am in Buy & Sell
The major parts of the components shown in figure, there are still the core part of the coal briquetting machine, which is the roller.It depends on its quality of the roller's life.The roller's material is 65Mn and it divide into two kinds, one is whole casting, and the other is forging according to forming method. The density is small and the structure is rough, but economic.
Casting is formed by air hammer heavy, which improve the density and wear resistance, so that it extends the service life of the roller.The cavity of the roller has good flow chart.This kind of roller fit for all kinds of materials. It fits for metal powder materials, but the disadvantage is a little expensive cost.After mixing,materials through feeder machine are sent into mineral powder coal briquette machine for forming balls.
Discharged products are very wet,so at this time,these products can enter into dryer machine for drying. Thus balls are dry and easy to move and storage.The charcoal ball press briquette machine production line is often composed of crusher,carbonization furnace, mixer machine, ball press briquette machine,dryer,packing machine.
The charcoal ball press coal briquetting plant production line has the advantages of simple structure, easy operation, high output, easy transportation and other advantages.The series of briquette machine transmit on power to the pair rollers through reducer, and make the pair roller drive in opposite direction. The materials naturally fall into the roller cavity. With the driving of the two rollers, the pressure of materials improves from small to big. When materials go to the rollers rotating line connecting point, the pressure of the two rollers reaches the peak pressure. These materials become finished briquettes from powder the huge line pressure.
copper concentrate briquetting machine?http://www.chinafote.com/pro/p64.html