The Types and Application of Shaking Table
21 June, 2013 at 6:23 am in Buy & Sell
The mineral processing shaking table is a kind of gravity separation equipment used for the separation of the fine materials. The mineral processing shaking table is widely used for the separation of the tin, tungsten, gold, silver, lead, zinc, tantalum, niobium, iron, manganese, titanium and coal, etc.. Henan Hongxing Mining Machinery Co., Ltd. has a long history of the production of the mineral processing shaking table and continues the development and innovation. The mineral processing shaking table is developed based on the straight bed concentrator table, single curvelet bed gold shaking table shaker and the hyperbolic bed jerking table so that the handling capacity, recovery rate and the concentration ratio can greatly increase. The shaking table beneficiation is to use the symmetrical reciprocating motion of the mechanical slate and the thin layer slope flow on the oblique bed to make the ore particles on the bed can be separated. The starting of crushing manufacturing industry of crushing machine such as jaw crusher, impact crusher and cone crusher is not so early, so that is the reason why the experience is short and the ability of the technology is not so strong. Most of the companies still are in a certain condition of generation belong to the times of 60-70, whose innovation and research cannot be progressing continuously all the time.
The mineral processing shaking table belongs to the flow membrane beneficiation equipment. All the shaking tables are composed with the bed, rack and transmission mechanism. The bed is trapezoid or rhombus. The entire bed is supported by the rack gear. One end of the bed is installed with the transmission device. The shaker is the common equipment used for the separation of the fine ore particles. When the mineral processing shaking table is used for processing the gold ore, the effectively selected tick size range is from 3mm to 0.019 mm. When the mineral processing shaking table is used for the coal preparation, the upper limit of the particle size can be up to 10 mm. The mineral processing shaking table produced by Henan Hongxing Mining Machinery Co., Ltd. has the advantage of high sorting accuracy. High grade concentrate or the exhaust tailings can be got through only one separation.